Specifications

Category

AutomatedWinding-Slitting Machine

ApplicableMaterial

PETFilm, PC Film, PVC Film, PP Film,   Aluminum Plastic CompositeFilm, Aluminum Film, Copper Film, Mylar, Nonwoven   Fabric,Tissue Paper, Kraft Paper, and etc.

MaxSpeed for Winding / Slitting

350m/min (Depending on kinds of material   applied)

ApplicableWidth of Axial / Material

500mm ~2000mm (Customizable)

Min.Width of Slitting

3mm(Depending on kinds of source   material areapplied)

Toleranceof Slitting Width

±0.1mm(Depending on kinds of material   applied)

ApplicableThickness of Material

0.01mmand above (Depending on kinds of   materialapplied)

MaxApplicable Diameter of Coil

800mm(Customizable)

ApplicableInner Diameter of Coil

D = 2”and above (Customizable)

MaxApplicable Weight of Material

1500 Kg(Customizable)

RatedFrequency

50Hz& 60Hz

RatedVoltage

220V,380V, 415V, 440V, 460V, 480V, or   Dual-Voltage(Customizable)

EnvironmentalRestriction

Location

Indoor.The product should be installed   on flat and solidfoundation.

VoltageRegulation

±10%

FrequencyRegulation

±5%

AmbientTemperature

-5°C~40°C

Altitude

Notexceed 1000 Meters

RelativeHumidity

Lessthan 85% RH (Non-Condensation)

Components

UnwindingUnit

-Central Driven Uncoiling System with   Electromagnetic Brakeand Manual Alignment System.

- AutoAlignment System (Optional)

DeliveringUnit

-Material is delivered through the   Synchronously DrivenSupplying Roller to Synchronously Driven Central   DividingRoller driven by DOLIN made Inverter Duty TransmissionSystem.

SlittingUnit

-Choices of RazorCutter or Circular  Cutter with fine-adjustable and moveable cuttermounts.

RewindingUnit

-Synchronously dual-rollers winding   during central surfaceslitting, or synchronously single-roller rewinding   duringpure rewinding driven by DOLIN made Inverter Duty TransmissionSystem.

-Pneumatic Lifting Device makes work   easier.

ControllingUnit

- NumberDisplayed Counter with Pre-set   and Two-step DecelerationFunction

- Meterfor Strain Force of Winding   Material

- Meterfor Support Force of Rewinding   Roller

-Separated and Independent controllers   for pneumatic systemand electronic components.

Others

- EdgeWaste Blower with Expulsion Tube

Accessories

- Upper  & Bottom Circular Cutter Blades

- Razor  Cutter Blade

- Upper  Circular Cutter Mount

- RazorCutter Mount

- 1mm ~50mm Upper Cutter Spacer

- 1mm ~50mm Bottom Cutter Spacer

Features

- WithDual-rollers Center Surface   Rewinding Technology, eachroller gives stand-alone rolling speed supplied by   ItsIndividual power motor; therefore, both rollers can rewindsynchronously   in different diameter.

- WithVector Control Inverter Drive,   rewinding unit results inhigh accuracy, high performance, and low noise.

- Bothunrolling and rewinding rollers   for source and target coilsare integrated with easy lowering system.

- Allrollers and axles are calibrated by   Dynamic BalancingTreatment.