Description:
Micron order cutting accuracy guaranteed by the NC system.One-touch setting of cutting size.
Rubber seals gasket cutting machine for auto parts.
The product photo which was cut with the cuttingmachine.
It is great degree of precision;high speed.
The best for the smallwork.
Space-saving installation madepossible by the compact design.
A method of Touch-Panel.
Easy setting for conversationsystem.
It cut down on runningcost.
Increase of efficiency.
It is option torepletion.
NAKAYAMA NNC awarded a gold medal at the LeipzigMesse in Germany.
Wehave export results more than ten countries all over theworld.
Our introduction video can be seen.(You Tube)
http://www.youtube.com/watch?v=S1YHxWThQI0&context=C44c72aaADvjVQa1PpcFPJV4-l8qmJckSAKXrqwgJhaq6ZZoCERfE=
The mechanical image can be seen.(You Tube)
http://www.youtube.com/watch?v=Z_clJqqy18s
A difference with the featuring of a cutmanufacturing method, cost with the press manufacturing method isdescribed.
The specification of the machine is below.
The stable high-precisionproduct
It is the epoch-making production technique to be different fromthe way of being due to the conventional press molding and tocreate the shape of the product by the cut in the packing.
Difficult product however, the rubber cut manufacturing methodcan be produced in the stable quality, the dimensional accuracy bythe rubber press manufacturing method.
The dimensional accuracy of the cut is within ±0.08mm.
It is not in the deburringprocess.
To cut the mills ends of the pipe after processing in the cutmanufacturing method, the product doesn''t have Parting Line.
The yield rises.
Because only the mills ends part disposes of it in the cutmanufacturing method, there is little abandonment quantity comparedwith the press manufacturing method and the yield rises.
The mold is a living longlife.
In the press manufacturing method, the consumption of the partof eating uprelates to the lifetime of the mold roughly.
However, because the part of eating up disposes of it asthe mills ends in the cut manufacturing method, the lifetime of themold becomes long compared with the press manufacturing method.
It realizes to be low incost.
It is when saying how the rubber cut manufacturing methodrealizes to be low in cost.
Example)
When making 10 molds taking by the press formation to 1000orders, the time to press 100 times becomes necessary.
When making press time with once 10 minutes
(1000/10)×10minute=1000minute
When making 10 products to remove a mold 10 pipe to 1000 ordersin the rubber cut manufacturing method and to come off to 1 pipe,the press working finishes at 10 times.
It makes press time with once 10 minutes and it is.
(1000/10/10)×10minute=100minute The time to begin press
It is when making 5seconds of 1 cuts.
1000×5seconds=5000seconds about 83.3minute
Total 100minute 83.3minute=183.3minute
The difference in this time becomes a differencewith personnel expenses and realizes costcutting.
