- socket welding flange
- 2017-01-17 01:49
- size 1/2"-72"Typesocket welding flangestandardASME B16.5 ASM E B16.47 MSS SP - 44 EN 1092materialstainless steel,carbon
- Slip On Flange
- 2017-01-17 01:49
- size 1/2"-72"TypeSlip On FlangestandardASME B16.5 ASM E B16.47 MSS SP - 44 EN 1092materialstainless steel,carbon steel,A
- Alloy elbow
- 2017-01-17 01:49
- sizeFrom1/2” to 72”angles45Deg,90Deg,180DegthicknessSCH20,SCH30,SCH40,STD,SCH80,SCH100,SCH120,SCH160,XXSstandardASTMA2
- carbon steel elbow
- 2017-01-17 01:49
- sizeFrom1/2” to 72”angles45Deg,90Deg,180DegthicknessSCH20,SCH30,SCH40,STD,SCH80,SCH100,SCH120,SCH160,XXSstandardASTMA2
- stainless steel elbow
- 2017-01-17 01:49
- sizeFrom1/2” to 72”angles45Deg,90Deg,180DegthicknessSCH20,SCH30,SCH40,STD,SCH80,SCH100,SCH120,SCH160,XXSstandardASTM A
- stainless steel pipe
- 2017-01-17 01:49
- Type:stainless steel pipeApplication:Applies to oil, aviation, metallurgy, food, water conservancy,electric power, chemi
- alloy steel pipe
- 2017-01-17 01:49
- Type:alloy steel pipeApplication:it is used in petroleum,chemical,electric power,boiler etc,as they Resistance to high t
- Bend
- 2017-01-17 01:49
- sizeSeamless:from 1/2" to 24" ,Welded:from 24" to 96"( or as customer requirements)angles22.5 CARBON STEEL PIPE FITTINGS
- forged pipe fitting cap
- 2017-01-17 01:48
- size1/8"-4"Typesocket weld end/screw threadthickness3000Lbs, 6000Lbs,9000Lbs( SCH80, SCH160, XXS)standardASME B16.11mat
- Alloy steel reducer
- 2017-01-17 01:48
- sizeSeamless:from 1/2"-24",Welding: 24"--72"Typecon & eccthicknessSCH20,SCH30,SCH40,STD,SCH80,SCH100,SCH120,SCH160,XXSst
- Sockolets
- 2017-01-17 01:48
- size1/8"-4"Typescrew threadthickness3000Lbs, 6000Lbs,9000Lbs( SCH80, SCH160, XXS)standardMSS-SP-79materialCarbon steel(
- reducing tee
- 2017-01-17 01:48
- sizeFrom1/2” to 72”thicknessSCH20,SCH30,SCH40,STD,SCH80,SCH100,SCH120,SCH160,XXSstandardASME B16.9 MSS SP-75 DIN2615 J
- Threadolet
- 2017-01-17 01:48
- size1/8"-4"Typescrew threadthickness3000Lbs, 6000Lbs,9000Lbs( SCH80, SCH160, XXS)standardMSS-SP-97materialCarbon steel(
- Weldolet
- 2017-01-17 01:48
- size1/8"-4"Typebutt weldingthickness3000Lbs, 6000Lbs,9000Lbs( SCH80, SCH160, XXS)standardMSS-SP-97materialCarbon steel(
- flat face flange
- 2016-10-26 13:37
- size1/2"-96"Typeflat face flangestandardASME B16.5 ASM E B16.47 MSS SP - 44 EN 1092materialstainless steel,carbon steel,
