- Miniature
- 2017-01-17 18:20
- Miniature bearing means metric series, outer diameter less than 9mm.
- Inch size
- 2017-01-17 18:19
- Inch bearing : Outline dimensions and tolerances in Imperial units of measurement representation of rolling bearings. Ap
- Self Aligning
- 2017-01-17 18:19
- Double row self-aligning ball bearings have a sphere raceway in the outer ring and a double raceway in the inner ring. T
- Open of the basic design
- 2017-01-17 18:19
- The basic design self-aligning ball bearing is available with a cylindrical bore or, in certain size ranges, with a tape
- Sealed bearing
- 2017-01-17 18:19
- Sealed bearings are lubricated as standard with a grease with a lithium thickener, that has good rust inhibiting propert
- Bearings with an extended inner ring
- 2017-01-17 18:19
- Self-aligning ball bearings with an extended inner ring are axially located on the shaft by means of a pin or shouldered
- Angular contact ball bearing
- 2017-01-17 18:19
- Angular contact ball bearings are particularly suitable for carrying combined (axial and radial) loads. Sometimes, they
- Deep groove ball bearing
- 2017-01-17 18:19
- Deep groove ball bearings are non-separable and require little attention or maintenance in service,capable of operating
- Double row angular contact ball bearing
- 2017-01-17 18:19
- Double row angular contact ball bearings identified by a series designation are produced as standard with Normal axial i
- Single row deep
- 2017-01-17 18:19
- Single row deep groove ball bearings are particularly versatile. They are simple in design, non-separable, suitable for
- Cylindrical roller bearing
- 2017-01-17 18:19
- Cylindrical roller bearings are commonly separable and easy to mount and dismount. They can be divided into single row,
- Double row cylindrical roller bearings
- 2017-01-17 18:19
- Double row cylindrical roller bearings have a low cross section, high load carrying capacity and high stiffness. Therefo
- Single row cylindrical roller bearings
- 2017-01-17 18:19
- The rollers in a single row cylindrical roller bearing are always guided between the integral "open" flanges on one of t
- Tapered roller bearing
- 2017-01-17 18:19
- Taperedrollerbearingsare generally of separable design and have tapered cone and cup raceway between which tapered rolle
- Single row inch size tapered roller bearings
- 2017-01-17 18:18
- Inch taper roller bearing structure and the assembling size precision and the rotating precision is different from metri
- Single row deep groove ball bearings
- 2016-10-23 06:02
- Single row deep groove ball bearings are particularly versatile. They are simple in design, non-separable, suitable for