- Vertical Drip Rain Testing Machine
- 2017-01-13 11:41
- The machine is used for the testing of IPX1 and IPX2.It comfirms to IEC60529 degree of protection provided by enclosures
- Socket-outlet Torque Balance Tester
- 2017-01-13 11:41
- The HT Plug torque tester is for compliance is checked by engaging the device, as during intended use, with the socket-o
- Test Rod Probe C HT-I03
- 2017-01-13 11:41
- This probe conforms to standard requirements of IEC61032 test probe C and IEC60529 for IP3 and IEC60065.This rod probe i
- Load of Power Line Testing Machine
- 2017-01-13 11:41
- Input voltage: AC220V ± 5 %, 50HZOutput current: 0 ~ 40A is arbitrary adjustableOutput voltage: 0 ~ 240V adjustableTest
- Test Finger Probe B HT-I02
- 2017-01-13 11:41
- This is a precision test finger made in accordance with many standards like IEC 61032 figure 2,IEC60950 figure 2A?IEC608
- Multi Mobile Outlets Mechanical Strength Testing Equipment
- 2017-01-13 11:41
- This device complies with standard requirements of GB2099 - 2008 (Figure 29) , IEC60884 (Figure 29) , applicable for the
- Plug Set Heat Insulation Testing Device
- 2017-01-13 11:41
- This device meets the standards of GB2099-2008(figure 40), (IEC60884-1 figure 40), applicable to test improper heat resi
- Test sphere probe HT-I01
- 2017-01-13 11:40
- It conforms to the standard requirements of IEC61032 fig.1, IEC60529 IP1 and IEC60065. This probe is intended to verify
- Switch Plug Socket Endurance Tester
- 2017-01-13 11:40
- This device complies with standard terms of 20, 21 in IEC60884-1(figure 16) and IEC60669-1 as well as IEC61058-1. It is
- Apparatus for verification of maximum and minimum force MF-1
- 2017-01-13 11:40
- This Tester is designed to meet the exacting requirements of major international standards such as IEC 60884-1 Fig. 18 a
- Handheld Jet Nozzle SN-2
- 2017-01-13 11:40
- The jet nozzle is designed and manufactured in accordance with IEC60529 clause IPX5 and IPX6. It is used for the waterpr
- Heat Resistance Compression Test Equipment
- 2017-01-13 11:40
- The apparatus comprises two steel jaws, having a cylindrical face of 25 mm radius, a width of 15 mm and a length of
- Household Appliance Supply Cord Flexing Test Apparatus
- 2017-01-13 11:40
- Standard:Clause 23.3 and 25.14 of IEC 60335-1 Household and similar electrical appliances – Safety – Part 1:General re
- High Temperature Indentation Tester
- 2017-01-13 11:40
- This test apparatus has a rectangular blade (see figure 41a) with an edge 0,7 mm wide, to be used in the case of round p
- Ball Pressure Testing Device
- 2017-01-13 11:40
- This ball pressure tester is applicable to assess the heat resistance of electrical shell, external parts and plastics a
- Temperature Measurement Corner CS-1
- 2017-01-13 11:40
- Product information:The temperature measurement corner conforms to the standard requirement of IEC60335-1:2004 chapter 1
- Stability and Mechanical Hazards Inclined Plane Tester Devic
- 2017-01-13 11:40
- The device is comfirms to clause 20.1 of IEC 60335-1 Household and similar electrical appliances – Safety – Part 1:Gen
- Screwed Glands Test Equipment
- 2017-01-13 11:40
- The device is used to check screwed glands, and conform to the IEC60598-1 clause 4.12.5.Screwed glands shall be fitted w
- Spray Nozzle Tester
- 2017-01-13 11:39
- The spray nozzle is designed and manufactured according to IEC60529, IEC60598-1, IEC 60335-1, IEC60745-1. It is a hand-h
- Horizontal and vertical microwave oven door endurance tester
- 2017-01-13 11:39
- The microwave oven door endurance tester is designed and manufactured according to IEC60335-2-25, a dedicated tester whi