- FeCrCo & Crovac
- 2017-01-05 00:28
- FeCrCo is one of machinable permanent magnetic alloy, which has good plasticity, ductility and machinability. It has the
- CoFeVCr
- 2017-01-05 00:28
- Characteristics and Performance of FeCrCo Magnets Characteristics: Has similar Alnico5 magnets performance.Can be machin
- FeCrCoMo
- 2017-01-05 00:28
- Characteristics: Has similar Alnico5 magnets performance.Can be machined by drilling, milling, grinding, punching and so
- Alnico Magnets
- 2017-01-05 00:28
- Cast Alnico 5 is the most commonly used of all the cast Alnico magnets. This material is used extensively in rotating ma
- Sintered NdFeB
- 2017-01-05 00:28
- NdFeB magnets can be manufactured by sintering, compression bonding, injection molding, and extrusion. The sintered form
- Alcomax3
- 2017-01-05 00:28
- AlNiCo permanent magnets have been made from alloys of aluminum, nickel and cobalt with iron. Alnico and alcomax are two
- NdFeB Magnets
- 2017-01-05 00:28
- Bonded NdFeB magnets are produced by binding rapid-quenching Nd-Fe-B powders which is mixed with plastic resin to form a
- Alnico Pot Magnet
- 2017-01-05 00:28
- Alnico Shallow Pot with red paintAlnico Shallow Pot is our recommended product. We,SENS Magnetic Products, Inc is an Aln
- Bonded NdFeB
- 2017-01-05 00:27
- The compression molded magnets are limited for simple geometries, but they can offer higher magnetic strength than injec
- Alnico6
- 2017-01-05 00:27
- Alnico6 ring,diametrally magnetized.super accurate.Alnico alloys basically consist of aluminum, nickel, cobalt, copper,
- Ceramic
- 2017-01-05 00:27
- Hard Ferrite (ceramic) magnets, composed of barium or strontium, were developed in the early 1960's as an alternative to
- Sm2Co17
- 2017-01-05 00:27
- Applications of Samarium Cobalt Magnets Computer disc drives Sensors Traveling wave tubes Linear actuators Satellite sys
- Magnets
- 2017-01-05 00:27
- Our magnetic products: Magnets and pickups do not have sounds, a manget's sonic result in guitar pickups application dep
- Sintered SmCo
- 2017-01-05 00:27
- NdFeB magnets can be manufactured by sintering, compression bonding, injection molding, and extrusion. The sintered form
- Small Magnets
- 2017-01-05 00:27
- Sens Magnetic Products, Inc,(SensMag, Inc) can make micro magnets in Alnico, NdFeB, SmCo , Ceramic CeCoCuFe and other ma
- Bonded SmCo
- 2017-01-05 00:27
- Samarium Cobalt (SmCo) magnets, of the Rare Earth class, have been available since the early 1970's. These magnets posse
- Magentic Cups
- 2017-01-05 00:27
- Ceramic Pot (RB) is our recommended product. We,SENS Magnetic Products, Inc is an Ceramic Pot (RB) and SmCo permanent ma
- Magnetic Lifters
- 2017-01-05 00:27
- Mainly uses in the hoisting process with by the hoisting work piece connection,uses in to move the steel plate and other
- Neodymium Iron Boron
- 2017-01-05 00:27
- NdFeB magnets can be manufactured by sintering, compression bonding, injection molding, and extrusion. The sintered form
- Channel Magnets
- 2017-01-05 00:27
- Ceramic(Hard ferrite) magnets were developed in the early 1960 as a low-cost alternative to metallic magnets (steels and
