- 2 Flutes Square End Mills
- 2017-01-16 08:38
- Chip out easily, can easy disposal chip, working piece out. Slide milling the flat surface.
- 4 Flutes Square End Mills
- 2017-01-16 08:38
- Helix angle 45 degrees with more cutting surface, smoothes the surface.
- 6 Flutes Hardness Corner Radius End Mills
- 2017-01-16 08:38
- With the round nose can save the time while cutting out of the mould easily.
- 2 Flutes Long Shank Ball Nose End Mills
- 2017-01-16 08:38
- With the long shank can cut the work piece deeper. Reduce obstruction while cutting will expand the life.
- 4 Flutes Ball Nose End Mills
- 2017-01-16 08:38
- Cutting the round curved surface.
- 6 Flutes Clearance Corner Radius End Mills
- 2017-01-16 08:38
- Stay the work piece out of touch.
- 4 Flutes Long shank Square End Mills
- 2017-01-16 08:38
- With the long flute will cut more area of the mould, enhance the progress of moldings also.
- 2 Flutes Long Neck Square End Mills
- 2017-01-16 08:38
- With the long neck can Deeping the work piece inside.
- 2 Flutes Corner Radius End Mills
- 2017-01-16 08:38
- With the round nose can save the time while cutting out of the mould can easily moulding out.
- 2 Flutes Taper Neck Tapered End Mills
- 2017-01-16 08:38
- With tapered will cut more area of mould in one blade and accelerating moulding
- 4 Flutes Roughing End Mills
- 2017-01-16 08:38
- With largely cutting, numerously using in the industry.
- 3 Flutes Aluminum Cutting End Mills
- 2017-01-16 08:38
- With aluminum can especially cut the soft materials work piece easily.Possess thin and sharp of the nose tool compare wi
- 2 Flutes Ball Nose End Mills Aluminum Cutting.
- 2017-01-16 08:37
- With aluminum can especially cut the soft materials work piece easily.