- Double-end Gluten Analyzer
- 2016-11-12 22:40
- Product introduction???ST007B Double-end Gluten Analyzer ST007B Double-end GlutenAnalyzer, composed of main processor, S
- SD7305 Demulsibility Tester
- 2016-09-25 13:45
- The instrument is designed and made as per the national standard of Peoples Republic of China GB/T7305 Test Method for D
- SH0048 Lubricating Grease Apparent Viscosity Tester
- 2016-09-25 12:01
- Lubricating Grease Apparent Viscosity Tester Conform to SH/T0048 Γ ОСТ 7163Application ：Determination of appar
- SH101 Mechanical Impurity Tester
- 2016-09-25 12:01
- I. Summary The instrument is designed and made as per the national standard of Peoples Republic of China GB/T511 Test M
- SH105B Automatic Closed Cup Flash Point Tester
- 2016-09-25 12:01
- This instrument is designed and manufactured as per standards GB/T 261-2008 Determination of Flash Point - Pesky-Martens
- SH106B Automatic Open Cup Flash Point Tester
- 2016-09-25 12:01
- This instrument is designed and made as per GB/T3536-2008 Petroleum Products - Determination of Flash and Fire Points -
- SH125A Oil dielectric strength tester
- 2016-09-25 12:01
- Product introductionOil dielectric strength tester design and manufacture is according to the National Standard GB/T507
- SH107 Automatic Interfacial Tension Tester
- 2016-09-25 12:01
- I. SummaryThe instrument is designed and made as per the National Standard of Peoples Republic of China GB/T6541-86 (199
- SH108 Automatic Acid Number Tester
- 2016-09-25 12:01
- The instrument can meet the requirements of the National Standard of Peoples Republic of China GB/T264 Test Method for A
- SH269 Mechanical Grease Worker(for cone penetration)
- 2016-09-25 12:01
- Mechanical Grease Worker is according to the standards of GB/T 269 and ASTM D217.Working device: installed on the base a
- SH113 Automatic Solidifying Point & Pour Point
- 2016-09-25 12:01
- SH113 Automatic Solidifying PointPour Point The instrument is used to determine the solidifying point and pour point of
- SY7325 Lubricating oil and grease evaporation loss tester
- 2016-09-25 12:01
- Summary：Lubricating oil and grease evaporation loss tester design and manufacture is according to the GB/T7325《lubrica
- SH115 Oil dielectric loss tester
- 2016-09-25 12:01
- This instrument based on IEC and the relevant provisions of the state, to play their own technological superiority, care
- SD261 Closed-cup Flash Point Tester
- 2016-09-25 12:01
- This instrument is manufactured according to the standard of GB/T 261-2008.And this instrument is applied to the method
- SH117 Wide Temperature Dropping Point Tester
- 2016-09-25 12:01
- Wide Temperature Dropping Point Tester conform to GB/T3498-83（91）、ASTMD2265.Characteristic：1 Can do 6 experiments at
- SH121 Automatic Multifunctional Degassing tester
- 2016-09-25 12:01
- SH121 Multifunctional Degassing testerConform standard GB/T17625 DL429.4，For the oil dissolved gas component content de
- SH122 Demulsibility Tester
- 2016-09-25 12:01
- SH122 Demulsibility Tester is designed and made as per the national standard of Peoples Republic of China GB/T7305-87 Te
- SH123 Lubricating Oils Rust Tester
- 2016-09-25 12:01
- The instrument is designed and made as per the national standard of Republic of China GB/T11143 Test Method for Rust-Pre
- SH123 Rust Corrosion Tester
- 2016-09-25 12:01
- SH123 Rust Corrosion Tester is designed and made as per standards of GB/T 11143,GB/T 5096 and SH/T 0023. It is a multipu
- SD-4929A Grease dropping point meter
- 2016-09-12 02:25
- This instrument conform to GB/T4929、ISO2176、ASTMD566、TP31etcTechnical parameter :1.Grease cup： bore size∮9.92mm，cu